skip to content | Accessibility Information

My comic book of the process and development of Digital Fabri-Cast
Posted 15 May 2014 16:19
Experimenting with casting with different materials and textures to put on the legs of the component
Posted 15 May 2014 10:57
Our component is all printed out were now making the mould for the alginate to fill so we can get mass producing these components out of concrete to be assembled on the 1st floor
Posted 13 May 2014 16:32
Putting up our cardboard support structure on Floor 1
Posted 12 May 2014 15:08
The successful 3D printing of our components today
Posted 9 May 2014 17:35
Day 5- 3D printing our components today is the objective
Posted 9 May 2014 12:11
Day 4- All working hard on creating our components ready to create our negative moulds to 3D print for tomorrow.
Posted 8 May 2014 15:16
Day 3 - From being split into groups we each chose a design to develop on Rhino this is our development.
Posted 7 May 2014 18:36
Day 3- in this mornings session we showed one another our models for our ideas of the components to create the screen. We have now selected 4 possible components to use and we are now in groups to further develop them to create a software model ready for being 3D printed tomorrow.
Posted 7 May 2014 12:10
Day 2 Afternoon Session- Using the skills we had learnt in the morning session we moved on to trying them out on the Farns House
Posted 6 May 2014 17:40
Day 2 - Learning the different commands for Rhino 3D... Just some of the ones we learnt this morning
Posted 6 May 2014 15:17
Day 1- Got to meet our collaborators for the project and we began creating sketch models which will later be created to create a screen
Posted 6 May 2014 13:56