Material testing - mixing different proportions of water, sand and cement for each cup.
Posted 14 May 2014 16:36
Lingxin F
Pouring plaster into the mould.
Posted 14 May 2014 16:19
Making mould in a smaller scale with alginate.
Posted 14 May 2014 16:18
Day 4 // I added holes and connectors to the component.
Posted 9 May 2014 17:40
Day 5 // Morning session // Introduction to 3D printing
Posted 9 May 2014 16:45
Day 5 // Afternoon session // Materials testing // Plaster, resin and latex.
Posted 9 May 2014 16:40
Day 3 // Presentation on individual models.
Posted 9 May 2014 16:24
Day 1 // Making sketch models // We were asked try not to connect components together with glue, so I was thinking maybe we can cut holes in the component and connect them with a wire structure.
Posted 9 May 2014 16:13
Day 1 // Making sketch models // Rhombus interlocking with each other.
Posted 9 May 2014 16:00
Day 2 // Morning session // Rhino Tutorial // Learning basic commands such as Scale, Extrude, Array etc.
Posted 9 May 2014 15:47