3D printed component
Posted 17 May 2014 14:18
Petru C
Concrete casting
Posted 17 May 2014 14:17
Models.
Posted 13 May 2014 11:14
Trying textures on the mould.
Posted 13 May 2014 11:14
Smoothing the sides of the component.
Posted 13 May 2014 11:13
Building the arch to support the big model.
Posted 13 May 2014 11:12
Display Space
Posted 13 May 2014 11:11
The first mould broke because the temperature in the printer was not the same all the time, and it started distorting. The second one came out perfectly after we wrapped the printer in a towel.
Posted 9 May 2014 15:37
3D Printing the mould for the group project.
Posted 9 May 2014 14:42
Early development sketch of my form and the way they stack.
Posted 9 May 2014 12:52
Rhinoceros model of the mould. There will be 2 of the same mould stuck on top of each other and the plaster will be poured in through the whole at the end.
Posted 9 May 2014 12:50
Rhino trials for the group model. Different types of joints.
Posted 8 May 2014 11:45
Brainstorming for a simple form that could generate a large scale figure, a wall or maybe pavilion, shed.
Posted 8 May 2014 10:13