Pouring in concrete for testing the first 1:1 component.
Posted 14 May 2014 12:36
Rashi V
Mould ready.
Posted 14 May 2014 12:35
Creating the mould for the components.
Posted 14 May 2014 12:35
Material and texture tests organised.
Posted 14 May 2014 12:31
comparing the actual model with the rhino model.
Posted 14 May 2014 12:30
experimentation with alginate and different textures,
Posted 14 May 2014 12:23
we decided to experiment with concrete by estimating ratios and checking the casting time.
Posted 14 May 2014 12:22
we tested a lot of moulds with different materials, textures, and finalised what material and texture we would use for the final construction model.
Posted 14 May 2014 12:20
We also tried using materials to give texture to our moulds so that they get printed onto our components as well.
Posted 13 May 2014 13:26
We tried to experiment with concrete casts and weighed the pros and cons of using it.
Posted 13 May 2014 13:23
Since our previous attempts at the plaster components failed, we tried to use other materials to cast into the moulds.
Posted 13 May 2014 13:22
We built an arch out of cardboard for support, but it was too huge to build, so we scrapped the idea and moved on to something else.
Posted 13 May 2014 13:11
Another group's component printed.
Posted 12 May 2014 11:07
3D printed my component.
Posted 12 May 2014 11:06
2 moulds made.
Posted 12 May 2014 11:06
Material Testing // plaster. resin, latex.
Posted 12 May 2014 11:05
we learnt how to 3D print using a 'Replicator G' code
Posted 12 May 2014 11:02
Before starting printing we were given a tutorial on how to use "Replicator G" in order to produce the final product
Posted 9 May 2014 14:17
This is a photo taken during the printing process.
Posted 9 May 2014 14:00
Today we tried printing test models using a 3d printer and we successfully printed one mould.
Posted 9 May 2014 13:58
Wire mesh view!
Posted 7 May 2014 16:26
I put in use the shortlisted model shapes from today's activity and the techniques from yesterday's tutorials and came up with this digitally casted installation.
Posted 7 May 2014 16:22
Posted 7 May 2014 15:05
In the afternoon, we tried 3D modelling it on the Rhinoceros 3D software.
Posted 7 May 2014 15:05
Day 3 - Today morning, we all presented our ideas to everyone and the shortlisted s few models to create digitally later in the afternoon.
Posted 7 May 2014 14:57
Making a building Envelope on Rhino - Day 2
Posted 7 May 2014 11:34
Day 2 - Rhino / Learning / Trying out different techniques on the software.
Posted 7 May 2014 11:25
Rhinoceros Tutorials! #helpful
Posted 7 May 2014 10:57
Day 1 - thinking, making sketch models, analogue models, Thinking about connections, shapes, scale, form, 2D and 3D, avoiding the obvious.
It was an interesting and busy Day 1
It was an interesting and busy Day 1
Posted 7 May 2014 10:54
A cardboard 'C' - stacking vertically and horizontally
Posted 7 May 2014 10:53
Water droplet shape / structure / stacking sideways and on top of each other / creating lighting effects
Posted 7 May 2014 10:53